What are the safety precautions when using this Baiting Machine High-Temperature-Resistant Metal Mechanical Timer?

During installation and wiring, you must ensure correct operation to avoid electrical accidents or equipment damage. First, confirm that the voltage matches. This Baiting Machine High-Temperature-Resistant Metal Mechanical Timer supports AC 120V and 250V. It cannot be used at overvoltage, otherwise it may cause a short circuit or fire. Be sure to disconnect the power supply during wiring to prevent the risk of electric shock. At the same time, the wires used must meet the 15A load capacity to avoid heating or even melting due to overload. During installation, the timer should be fixed in a stable and high temperature resistant position to prevent loosening due to vibration or high temperature deformation. In addition, it should be avoided to install in places prone to splashing water, oil or direct steam spray to avoid short circuits or corrosion of metal parts.

This Baiting Machine High-Temperature-Resistant Metal Mechanical Timer adopts a high temperature resistant metal mechanical structure, but it is still necessary to pay attention to the ambient temperature limit. Although it can withstand high temperatures, if it is exposed to extreme environments exceeding its rated temperature for a long time, it may affect its service life. At the same time, prevent water, oil or food residue from entering the timer to avoid electrical failure or mechanical jamming. The installation location should be away from flammable materials, such as plastics, paper, etc., to avoid fires caused by high temperatures.

Operations must be carried out strictly in accordance with the instructions to avoid man-made damage or safety accidents. The high-temperature metal mechanical timer of the bait machine only supports counterclockwise rotation adjustment. It is strictly forbidden to force clockwise operation, otherwise it may cause damage to the internal gears. During operation, the time cannot be forcibly dialed back. Wait for it to return to zero naturally or power off before adjusting. In addition, the contact capacity of this timer is 15A, and it cannot be used for electrical appliances that exceed this current, such as high-power commercial equipment. If multiple high-power devices need to be controlled at the same time, relays or shunt protection should be installed. When used in an oven or microwave oven, make sure that there is food or load in the device to avoid no-load operation, otherwise the appliance or timer may be damaged.

Regular maintenance can extend the life of the high-temperature metal mechanical timer of the bait machine and ensure safe operation. It is recommended to regularly check whether the wiring is aging or loose, and observe whether the contacts have signs of ablation. If there is any abnormality, it should be replaced in time. A small amount of high-temperature resistant grease can be applied to the mechanical part, but grease should be avoided to contaminate the circuit part. If the timer is stuck, cannot be reset, or is out of control, you should immediately turn off the power and contact after-sales service. Do not disassemble and repair it yourself. When cleaning, only wipe with a dry cloth. It is strictly forbidden to rinse with water or chemical solvents to avoid damaging the internal components.

To ensure safety, children and pets should be kept away from the timer to prevent accidental activation of the device due to accidental touch. If you find abnormal conditions such as smoke, odor, or abnormal noise during use, you must immediately turn off the power and stop using it. Wait for a professional to check before deciding whether to continue using it.